Electronic Modules
Showing 25–48 of 110 results
-
Electronic Components, Electronic Modules, Sensor Mudules
9V RGB Flasher Light | Police Light for Bikes | Bicycles | Cars
-56%
Electronic Components, Electronic Modules, Sensor Mudules9V RGB Flasher Light | Police Light for Bikes | Bicycles | Cars
-
🔵 High-Intensity RGB Flashing LEDs – Bright, colorful light patterns for maximum visibility day and night.
-
🚴 Perfect for Bikes, Cycles & Cars – Adds style while improving safety on the road.
-
🔋 Runs on Standard 9V Battery – No wiring needed, quick plug-and-play setup.
-
🎯 Multiple Flash Modes – Police-style strobe, rapid flash, slow blink, and RGB color cycling.
-
🛠️ Compact & Lightweight Design – Easy to mount on handlebars, seat posts, or dashboards.
-
☔ Weather-Resistant Body – Works reliably in rain, fog, and dusty environments.
-
🚓 Attention-Grabbing Police Light Effect – Enhances visibility in traffic and low-light conditions.
-
🌟 Long Battery Life – Energy-efficient LEDs for extended usage.
-
🔧 Easy Installation – No tools required; fits on most bicycle and vehicle surfaces.
-
✨ Multipurpose Use – Ideal for night rides, emergency visibility, decoration, or signaling.
SKU: n/a -
-
Electronic Components, Electronic Modules
ACCELEROMETER – ADXL335
- 3-axis sensing Small
- low profile package 4 mm × 4 mm × 1.45 mm LFCSP
- Low power: 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
SKU: n/a -
Electronic Components, Electronic Modules
Analog TDS Sensor Module Normal Quality
- Wide voltage operation: 3.3~5.5V
- 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
- The excitation source is an AC signal, effectively preventing probe polarization.
- Waterproof probe for long-term immersion in water
- Arduino compatible, easy to connect, plug and play, no soldering required.
SKU: n/a -
Audio Amplifier Module
Auto Botix CJMCU-TRRS 3.5mm Jack AV Stereo Module
Key Features
-
Standard 3.5mm TRRS audio jack connector
-
Breakout pins for Tip, Ring1, Ring2, and Sleeve
-
Supports stereo audio and microphone signals
-
Compact CJMCU PCB design
-
Easy integration with Arduino, ESP32, Raspberry Pi, and other development boards
-
Ideal for audio interface, headset projects, and signal routing
-
Durable PCB with clearly labeled pins
-
Suitable for DIY electronics, robotics, and embedded systems
SKU: n/a -
-
DIY Kits, Electronic Components, Electronic Modules, Mechanical Parts & Workbench Tools, New Arrival, Sensor Mudules, Soldering Iron & Accessories, Soldering tools, Tools & Accessories, Uncategorized
Auto Botix Mechanic 530 Precision Electronic Cleaning Solvent 750ml
-57%
DIY Kits, Electronic Components, Electronic Modules, Mechanical Parts & Workbench Tools, New Arrival, Sensor Mudules, Soldering Iron & Accessories, Soldering tools, Tools & Accessories, UncategorizedAuto Botix Mechanic 530 Precision Electronic Cleaning Solvent 750ml
🔹 Key Features
-
Precision Electronic Cleaner
Engineered for safe cleaning of PCBs, ICs, connectors, and electronic assemblies. -
Fast-Drying Formula
Evaporates quickly and leaves the surface completely dry and residue-free. -
Non-Conductive & Safe
Designed to be safe for sensitive electronic parts and helps prevent short circuits. -
Powerful Contaminant Removal
Effectively removes flux, oil, grease, dust, corrosion, and oxide buildup. -
Material Friendly
Compatible with most plastics, metals, rubber, and connectors when used properly. -
Anti-Static Cleaning Action
Helps maintain signal integrity and improves long-term reliability of circuits. -
Large 750ml Capacity
Ideal for professional workshops and frequent maintenance tasks.
🔹 Technical Specifications
-
Product Type: Precision Electronic Cleaning Solvent
-
Model: Mechanic 530
-
Brand (Market Reference): Mechanic
-
Volume: 750ml (AUTO BOTIX pack)
-
Drying Time: Fast evaporation
-
Residue: No residue after drying
-
Conductivity: Non-conductive
-
Application Method: Spray / direct application
-
Odour: Light solvent smell
-
Flammability: Flammable — use with caution
-
Suitable Materials: PCB, metal, plastic, rubber, connectors
🔹 Typical Applications
-
PCB and motherboard cleaning
-
Mobile phone and laptop repair
-
Removing solder flux after rework
-
Cleaning charging ports and connectors
-
Camera lens and optical cleaning
-
Industrial electronic maintenance
-
IoT and robotics hardware servicing
-
Preventive maintenance of electronic equipment
🔹 How to Use
-
Power OFF the device before cleaning.
-
Shake the can well.
-
Spray directly on the area to be cleaned.
-
Allow the solvent to evaporate completely.
-
Power the device only after full drying.
🔹 Why Choose AUTO BOTIX Version?
The AUTO BOTIX packed Mechanic 530 solvent is carefully sourced and quality-checked to deliver consistent cleaning performance. It is ideal for professional repair shops, electronics labs, and DIY enthusiasts who need a reliable, residue-free cleaning solution for precision electronics.
SKU: n/a -
-
Basic Electronic Components, Electronic Components, Electronic Modules, Motors , Drivers & Actuators
AUTOBOTIX drv8833 motor driver
-80%
Basic Electronic Components, Electronic Components, Electronic Modules, Motors , Drivers & ActuatorsAUTOBOTIX drv8833 motor driver
Key Features
-
Dual H-Bridge Motor Driver – Control 2 DC motors or 1 stepper motor simultaneously.
-
Wide Voltage Range – Supports motor supply from 2.7V to 10.8V, ideal for battery-powered applications.
-
High Current Capability – Provides up to 1.5A continuous current and 2A peak per motor channel.
-
PWM Speed Control – Compatible with PWM signals from microcontrollers for precise speed control.
-
Low On-Resistance MOSFETs – Ensures higher efficiency and reduced power loss.
-
Compact & Lightweight Design – Perfect for small robotics and embedded projects.
-
Low Power Sleep Mode – Reduces power consumption during standby.
-
Built-in Protection – Includes overcurrent protection, thermal shutdown, and undervoltage lockout for safer operation.
Technical Specifications
-
Driver IC: DRV8833
-
Motor Supply Voltage: 2.7V – 10.8V
-
Continuous Current: 1.5A per channel
-
Peak Current: 2A per channel
-
Motor Support: 2 DC Motors / 1 Stepper Motor
-
Control Interface: Digital Logic / PWM
-
Logic Compatibility: 3.3V and 5V systems
-
Operating Temperature: -40°C to +85°C
-
Protection: Overcurrent, Overtemperature, Undervoltage Lockout
Applications
The AUTOBOTIX DRV8833 Motor Driver Module is suitable for a wide range of electronics and robotics applications, including:
-
Arduino and microcontroller robotics projects
-
Gesture-controlled robots and smart vehicles
-
Line follower and obstacle-avoiding robots
-
DIY RC cars and robotic platforms
-
Smart automation systems
-
Educational STEM electronics kits
-
Small CNC and stepper motor control systems
Why Choose AUTOBOTIX DRV8833 Motor Driver?
AUTOBOTIX ensures high-quality components designed for makers, students, and robotics enthusiasts. The module provides stable performance, easy interfacing with microcontrollers, and efficient motor control for modern DIY electronics projects.
With its compact design, powerful performance, and built-in safety features, the AUTOBOTIX DRV8833 Motor Driver Module is an essential component for anyone working with robotics, automation, and embedded systems.
SKU: n/a -
-
Electronic Components, Electronic Modules, Sensor Mudules
Bluetooth Audio Music Player [Without Remote]
-60%
Electronic Components, Electronic Modules, Sensor MudulesBluetooth Audio Music Player [Without Remote]
- Configurations: MP Board, Stereo Board, Mono Board
- Connectivity: Bluetooth, FM, AUX, SD-Card
- Options: With IR, Without IR
- Amplifier: Built-in amplifier for enhanced sound quality
- Audio Formats: Supports various formats for versatile playback
- Application: Perfect for DIY audio projects and home theater setups
SKU: n/a -
Electronic Modules, Power Supply
Breadboard Power Supply Module 3.3V 5V MB-102 Solderless Bread Board DIY for Arduino Raspberry Pi, Black by AB0285
-50%
Electronic Modules, Power SupplyBreadboard Power Supply Module 3.3V 5V MB-102 Solderless Bread Board DIY for Arduino Raspberry Pi, Black by AB0285
- Designed to fit the standard MB102 bread board
- Power Supply comes with On/Off Switch
- Green LED power indication
- Built-in protection against short-circuit through power limiting circuitry
- compatible with 5V, 3.3V
- Input Voltage :6.5-12V (DC) or USB power
- Output voltage: 3.3V, 5V switchable
- Maximum Output Current: <700ma
- Two way independent control
- Output VoltageCan be switched to 0V, 3.3V, 5V
- On-board Two sets of 3.3V, 5V DC output pins, lets you connect directly to external circuits and to multiple breadboards.
- Dimension: 53 * 32 * 23 mm
SKU: AB0285 -
Electronic Components, Electronic Modules, Sensor Mudules
CentIoT – HW-586 Zb2L3 1.2v-12v 18650 Li-ion Lithium Lead-acid Battery Capacity + Resistance Discharge Tester Capacity load Meter (9999Ah)
-36%
Electronic Components, Electronic Modules, Sensor MudulesCentIoT – HW-586 Zb2L3 1.2v-12v 18650 Li-ion Lithium Lead-acid Battery Capacity + Resistance Discharge Tester Capacity load Meter (9999Ah)
- Power supply voltage: DC 4.5 – 6V (micro USB connector); Operating Current: less than 70mA
- Discharge voltage: 1.00V-15.00V 0.01V resolution Termination voltage range: 0.5-11.0V Supported by current: 3.000A 0.001A resolution
- Maximum voltage measurement error: 1% + 0.02V Maximum current measurement error: 1.5% + – 0.008A
- Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on.
- Check the image for Instructions Manual; Maximum capacity statistics support 9999Ah (9999000mAh); <b>Package Included:</b></br> 1Pc x battery capacity tester</br> 1Pc x Load resistor</br>
SKU: n/a -
Basic Electronic Components, Electronic Components, Electronic Modules, Uncategorized
CJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
-50%
Basic Electronic Components, Electronic Components, Electronic Modules, UncategorizedCJMCU-219 INA219 I2C Bi-directional Current Power Monitor Sensor Module
Key Features:
- Bi-directional Current Measurement:
Measures both charging and discharging current, perfect for battery-powered systems - High-Side Current Sensing:
Allows measurement without disturbing the ground path, improving system stability - I2C Communication Interface:
Easy integration with microcontrollers like Arduino, ESP32, Raspberry Pi - Measures Voltage, Current & Power:
Provides complete power monitoring in a single module - High Accuracy & Resolution:
Built-in 12-bit ADC ensures precise and stable readings - Wide Voltage Range:
Supports bus voltage measurement up to 26V DC - Low Power Consumption:
Efficient design suitable for continuous monitoring applications - Compact CJMCU Design:
Small size ideal for embedded and space-constrained projects
SKU: n/a - Bi-directional Current Measurement:
-
3D Printers & Parts, Electronic Modules
CNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
-49%
3D Printers & Parts, Electronic ModulesCNC Shield V3 Engraving Machine 3D Printer A4988 DRV8825 Driver Expansion Board
Specifications:
- Motor Drivers Supported: A4988 and DRV8825 (not included)
- Stepper Motors Supported: Up to 4 (X, Y, Z, A)
- Power Input: 12V-24V DC (depending on motor and power requirements)
- Control Interface: Compatible with Arduino Uno and GRBL firmware
- Stepper Motor Control: Precision control of stepper motors, ideal for engraving, CNC, and 3D printing applications
- Expansion: Additional I/O pins for auxiliary features like endstops, fans, and more
- Dimensions: Compact design, easy to integrate into small and large-scale machines
Applications:
- CNC Milling Machines: Controlling the movement of the motors for milling and engraving.
- 3D Printers: Managing the stepper motors for precise printing and axis movement.
- Laser Engraving Machines: Used for controlling motors in laser engraving systems.
- Laser Cutters: Perfect for integrating into laser cutting setups requiring motion control.
- Robotic Systems: For precise control of stepper motors in robotic applications.
SKU: n/a -
Amplifier Modules, Audio Amplifier Modules, Electronic Components, Electronic Modules, Sensor Mudules
Croptronia3 inch 10 watt sub woofer 3 Inch subwoofer Wired Speaker 4 ohm 10 Watt HiFi Woofer Deep Bass Coaxial Car Speaker
-60%
Amplifier Modules, Audio Amplifier Modules, Electronic Components, Electronic Modules, Sensor MudulesCroptronia3 inch 10 watt sub woofer 3 Inch subwoofer Wired Speaker 4 ohm 10 Watt HiFi Woofer Deep Bass Coaxial Car Speaker
- Diameter 8 cm
- Frequency Response high
- Door Mounted
- Peak Power Handling: 10
- Shape Round
SKU: n/a -
Electronic Components, Electronic Modules, Sensor Mudules
DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch
-30%
Electronic Components, Electronic Modules, Sensor MudulesDC Motor Speed Controller 4.5V-35V 5A Speed Control Switch
- Mini DC 4.5-35V 5A PWM Motor Speed Controller
- Wide voltage DC motor speed controller
- Operating Voltage: DC 4.5V – 35V
- Output Current: 0 – 5A
- Output Power: Max 70W
- PWM Duty Cycle: 1% – 100%
SKU: n/a -
Electronic Components, Electronic Modules, Mechanical Parts, Sensor Mudules
Electronic Digital LCD Display Thermometer Aquarium Refrigerator Water Temperature Gauge Meter with Probe
-40%
Electronic Components, Electronic Modules, Mechanical Parts, Sensor MudulesElectronic Digital LCD Display Thermometer Aquarium Refrigerator Water Temperature Gauge Meter with Probe
-
✅ Clear Digital LCD Display – Large screen shows temperature readings instantly and clearly.
-
✅ Wide Measuring Range – Monitors from -50°C to +70°C (-58°F to +158°F) with ±1°C accuracy.
-
✅ Waterproof Probe Sensor – Ideal for aquariums, refrigerators, freezers, incubators, and water tanks.
-
✅ Compact & Portable Design – Lightweight, space-saving, and easy to install anywhere.
-
✅ 1m Flexible Cable – Place the probe in the required location for convenient monitoring.
-
✅ Battery Operated – Powered by LR44/AG13 button cell (included), easy to replace.
-
✅ Multi-Purpose Use – Suitable for home, kitchen, pet care, food storage, scientific experiments, and daily household needs.
-
✅ Durable & Reliable – Built to provide accurate real-time temperature monitoring for long-term use.
SKU: n/a -
-
Electronic Components, Electronic Modules, Sensor Mudules
ESP32-CAM-MB Micro USB Download Module for ESP32 CAM Development Board / espcam programmer
-60%
Electronic Components, Electronic Modules, Sensor MudulesESP32-CAM-MB Micro USB Download Module for ESP32 CAM Development Board / espcam programmer
- Model: ESP32-CAM-MB
- Chipset: CH340G
- WiFi Image Upload is supported.
- support a variety of sleep settings.
- Lwip and FreeRTOS embedded.
- Encourage secondary growth.
- STA/AP/STA+AP working mode support.
- built-in flash and support for OV2640 and OV7670 cameras.
- support for one-click network configuration using Smart Config or AirKiss.
- Up to 160 MHz clock speed and 600 DMIPS of computing power.
- support for both local and remote firmware updates for serial ports (FOTA).
SKU: n/a -
Advance Development Boards, Development boards, DIY Kits, Electronic Modules, IOT & Wireless, IOT Development Boards, IOT WIFI Smart Switches, Premium Kits
ESP8266 Nodemcu CP2102 Wifi based Basic Starter Kit with Micro USB Cable, 2 Channel relay Module, Female to Female Jumper wire AB0280
-48%
Advance Development Boards, Development boards, DIY Kits, Electronic Modules, IOT & Wireless, IOT Development Boards, IOT WIFI Smart Switches, Premium KitsESP8266 Nodemcu CP2102 Wifi based Basic Starter Kit with Micro USB Cable, 2 Channel relay Module, Female to Female Jumper wire AB0280
SKU: AB0280 -
LASER Module, PIR/ IR/ Optical Sensor, Sensor Mudules
Focusable 200-250mW 650nm Laser Module Red Dot Laser Generator Diode Replacement Mini DIY Engraver AB0302
-42%
LASER Module, PIR/ IR/ Optical Sensor, Sensor MudulesFocusable 200-250mW 650nm Laser Module Red Dot Laser Generator Diode Replacement Mini DIY Engraver AB0302
- Output Power: 200-250mW
- Wavelength: 650nm (red)
- Operating Voltage: Typically around 3-5 volts DC
- Operating Current: Varies depending on the specific module, but typically within the range of 300-500mA
- Dimensions: Compact size, often around 12-20mm in diameter and 30-50mm in length
- Focusability: Adjustable focus lens for controlling the spot size and intensity of the laser beam
- Material Compatibility: Suitable for engraving on various materials such as wood, plastic, leather, and some metals
- Safety Features: May include features like overheat protection, voltage regulation, and power control to ensure safe operation
- Mounting Options: Some modules may come with mounting brackets or screws for easy installation
- Operating Temperature: Typically recommended for use within a certain temperature range, such as 0-40°C
SKU: AB0302 -
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & Wireless
Hc-05 Bluetooth RF Wireless Transceiver Module
-56%
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & WirelessHc-05 Bluetooth RF Wireless Transceiver Module
Applications:
- Wireless Communication: Used for wireless communication in embedded systems, IoT devices, home automation, etc.
- Arduino Projects: Commonly used in Arduino projects to enable wireless communication between an Arduino board and a mobile phone or other Bluetooth-enabled devices.
- Remote Control: Ideal for creating wireless remote control systems, such as controlling robots or smart devices.
- Data Transfer: Can be used for transferring data between devices, such as sensor data from one device to another.
Pin Configuration:
- VCC: Power supply (3.3V to 5V).
- GND: Ground connection.
- TXD (Transmit): Serial data output.
- RXD (Receive): Serial data input.
- STATE: Indicates the Bluetooth connection status.
- EN: Enable pin (used to set the module into AT command mode).
Package Includes:
- 1 x HC-05 Bluetooth module.
SKU: n/a
