Electronic Modules
Showing 25–48 of 110 results
-
Electronic Components, Electronic Modules, Sensor Mudules
9V RGB Flasher Light Police Style | Multi-Color Strobe LED for Bike, Bicycle & Car Safety Light
-56%
Electronic Components, Electronic Modules, Sensor Mudules9V RGB Flasher Light Police Style | Multi-Color Strobe LED for Bike, Bicycle & Car Safety Light
-
🔵 High-Intensity RGB Flashing LEDs – Bright, colorful light patterns for maximum visibility day and night.
-
🚴 Perfect for Bikes, Cycles & Cars – Adds style while improving safety on the road.
-
🔋 Runs on Standard 9V Battery – No wiring needed, quick plug-and-play setup.
-
🎯 Multiple Flash Modes – Police-style strobe, rapid flash, slow blink, and RGB color cycling.
-
🛠️ Compact & Lightweight Design – Easy to mount on handlebars, seat posts, or dashboards.
-
☔ Weather-Resistant Body – Works reliably in rain, fog, and dusty environments.
-
🚓 Attention-Grabbing Police Light Effect – Enhances visibility in traffic and low-light conditions.
-
🌟 Long Battery Life – Energy-efficient LEDs for extended usage.
-
🔧 Easy Installation – No tools required; fits on most bicycle and vehicle surfaces.
-
✨ Multipurpose Use – Ideal for night rides, emergency visibility, decoration, or signaling.
SKU: n/a -
-
Electronic Components, Electronic Modules
Analog TDS Sensor Module Normal Quality
- Wide voltage operation: 3.3~5.5V
- 0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
- The excitation source is an AC signal, effectively preventing probe polarization
- Waterproof probe for long-term immersion in water
SKU: n/a -
Audio Amplifier Module
Auto Botix CJMCU-TRRS 3.5mm Jack AV Stereo Module
Key Features
-
Standard 3.5mm TRRS audio jack connector
-
Breakout pins for Tip, Ring1, Ring2, and Sleeve
-
Supports stereo audio and microphone signals
-
Compact CJMCU PCB design
-
Easy integration with Arduino, ESP32, Raspberry Pi, and other development boards
-
Ideal for audio interface, headset projects, and signal routing
-
Durable PCB with clearly labeled pins
-
Suitable for DIY electronics, robotics, and embedded systems
SKU: n/a -
-
DIY Kits, Electronic Components, Electronic Modules, Mechanical Parts & Workbench Tools, New Arrival, Sensor Mudules, Soldering Iron & Accessories, Soldering tools, Tools & Accessories, Uncategorized
Auto Botix Mechanic 530 Precision Electronic Cleaning Solvent 750ml
-57%
DIY Kits, Electronic Components, Electronic Modules, Mechanical Parts & Workbench Tools, New Arrival, Sensor Mudules, Soldering Iron & Accessories, Soldering tools, Tools & Accessories, UncategorizedAuto Botix Mechanic 530 Precision Electronic Cleaning Solvent 750ml
🔹 Key Features
-
Precision Electronic Cleaner
Engineered for safe cleaning of PCBs, ICs, connectors, and electronic assemblies. -
Fast-Drying Formula
Evaporates quickly and leaves the surface completely dry and residue-free. -
Non-Conductive & Safe
Designed to be safe for sensitive electronic parts and helps prevent short circuits. -
Powerful Contaminant Removal
Effectively removes flux, oil, grease, dust, corrosion, and oxide buildup. -
Material Friendly
Compatible with most plastics, metals, rubber, and connectors when used properly. -
Anti-Static Cleaning Action
Helps maintain signal integrity and improves long-term reliability of circuits. -
Large 750ml Capacity
Ideal for professional workshops and frequent maintenance tasks.
🔹 Technical Specifications
-
Product Type: Precision Electronic Cleaning Solvent
-
Model: Mechanic 530
-
Brand (Market Reference): Mechanic
-
Volume: 750ml (AUTO BOTIX pack)
-
Drying Time: Fast evaporation
-
Residue: No residue after drying
-
Conductivity: Non-conductive
-
Application Method: Spray / direct application
-
Odour: Light solvent smell
-
Flammability: Flammable — use with caution
-
Suitable Materials: PCB, metal, plastic, rubber, connectors
🔹 Typical Applications
-
PCB and motherboard cleaning
-
Mobile phone and laptop repair
-
Removing solder flux after rework
-
Cleaning charging ports and connectors
-
Camera lens and optical cleaning
-
Industrial electronic maintenance
-
IoT and robotics hardware servicing
-
Preventive maintenance of electronic equipment
🔹 How to Use
-
Power OFF the device before cleaning.
-
Shake the can well.
-
Spray directly on the area to be cleaned.
-
Allow the solvent to evaporate completely.
-
Power the device only after full drying.
🔹 Why Choose AUTO BOTIX Version?
The AUTO BOTIX packed Mechanic 530 solvent is carefully sourced and quality-checked to deliver consistent cleaning performance. It is ideal for professional repair shops, electronics labs, and DIY enthusiasts who need a reliable, residue-free cleaning solution for precision electronics.
SKU: n/a -
-
Other ESP WiFi Modules, Relay Modules
Autobotix ESP 8266 WIFI 5V CHANNEL RELAY MODULE
Features:
- Built-in ESP8266 WiFi module for wireless communication
- 5V single-channel relay for switching electrical loads
- Supports remote control through WiFi network
- Compatible with Arduino IDE programming
- Compact PCB design for easy installation
- Suitable for smart home and IoT applications
- Can control AC and DC appliances remotely
- Easy GPIO access for custom projects
Applications:
- Home automation systems
- Smart light control
- Wireless appliance switching
- IoT-based automation projects
- Remote motor and pump control
- Robotics and embedded systems
- Industrial monitoring and automation
SKU: n/a -
Electronic Components, Electronic Modules, Sensor Mudules
Bluetooth Audio Music Player [Without Remote]
-60%
Electronic Components, Electronic Modules, Sensor MudulesBluetooth Audio Music Player [Without Remote]
- Configurations: MP Board, Stereo Board, Mono Board
- Connectivity: Bluetooth, FM, AUX, SD-Card
- Options: With IR, Without IR
- Amplifier: Built-in amplifier for enhanced sound quality
- Audio Formats: Supports various formats for versatile playback
- Application: Perfect for DIY audio projects and home theater setups
SKU: n/a -
-
Electronic Components, Electronic Modules, Sensor Mudules
CentIoT – HW-586 Zb2L3 1.2v-12v 18650 Li-ion Lithium Lead-acid Battery Capacity + Resistance Discharge Tester Capacity load Meter (9999Ah)
-36%
Electronic Components, Electronic Modules, Sensor MudulesCentIoT – HW-586 Zb2L3 1.2v-12v 18650 Li-ion Lithium Lead-acid Battery Capacity + Resistance Discharge Tester Capacity load Meter (9999Ah)
- Power supply voltage: DC 4.5 – 6V (micro USB connector); Operating Current: less than 70mA
- Discharge voltage: 1.00V-15.00V 0.01V resolution Termination voltage range: 0.5-11.0V Supported by current: 3.000A 0.001A resolution
- Maximum voltage measurement error: 1% + 0.02V Maximum current measurement error: 1.5% + – 0.008A
- Maximum battery capacity range: 9999Ah (1Ah = 1000mAh) greater value by shifting the decimal point to switch, when the display is less than 10Ah X.XXX, as shown above to achieve 10Ah XX.XX, and so on.
- Check the image for Instructions Manual; Maximum capacity statistics support 9999Ah (9999000mAh); <b>Package Included:</b></br> 1Pc x battery capacity tester</br> 1Pc x Load resistor</br>
SKU: n/a -
Basic Electronic Components, Electronic Components, Electronic Modules, Uncategorized
CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
-53%
Basic Electronic Components, Electronic Components, Electronic Modules, UncategorizedCJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module
Quick Overview
- 0.1 ohm 1% 2W current sense resistor
- Up to +26V target voltage
- Up to ±3.2A current measurement, with ±0.8mA resolution
- Senses Bus Voltages from 0 to 26 V
- 2C- or SMBus-compatible interface. The
- Reports Current, Voltage, and Power.
SKU: n/a -
Amplifier Modules, Audio Amplifier Modules, Electronic Components, Electronic Modules, Sensor Mudules
Croptronia3 inch 10 watt sub woofer 3 Inch subwoofer Wired Speaker 4 ohm 10 Watt HiFi Woofer Deep Bass Coaxial Car Speaker
-60%
Amplifier Modules, Audio Amplifier Modules, Electronic Components, Electronic Modules, Sensor MudulesCroptronia3 inch 10 watt sub woofer 3 Inch subwoofer Wired Speaker 4 ohm 10 Watt HiFi Woofer Deep Bass Coaxial Car Speaker
- Diameter 8 cm
- Frequency Response high
- Door Mounted
- Peak Power Handling: 10
- Shape Round
SKU: n/a -
Electronic Components, Electronic Modules, Sensor Mudules
DC Motor Speed Controller 4.5V-35V 5A Speed Control Switch
-30%
Electronic Components, Electronic Modules, Sensor MudulesDC Motor Speed Controller 4.5V-35V 5A Speed Control Switch
- Mini DC 4.5-35V 5A PWM Motor Speed Controller
- Wide voltage DC motor speed controller
- Operating Voltage: DC 4.5V – 35V
- Output Current: 0 – 5A
- Output Power: Max 70W
- PWM Duty Cycle: 1% – 100%
SKU: n/a -
Basic Electronic Components, Electronic Components, Electronic Modules, Motors , Drivers & Actuators
DRV8833 2 Channel DC Motor Driver
-81%
Basic Electronic Components, Electronic Components, Electronic Modules, Motors , Drivers & ActuatorsDRV8833 2 Channel DC Motor Driver
Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor.
Operating voltage: 2.7 V to 10.8 V
Output current: 1.2 A continuous (2 A peak) per motor.
Inputs are 3V- and 5V-compatible.
SKU: n/a -
Breadboard, Electronic Modules
Dual USB 18650 Battery Charger PCB Power Module 5V 1A 2.1A Mobile Power Bank Accessories AB0167
-57%
Breadboard, Electronic ModulesDual USB 18650 Battery Charger PCB Power Module 5V 1A 2.1A Mobile Power Bank Accessories AB0167
Features
- Supports 3.7V 18650 lithium-ion batteries
- Dual USB output ports (5V 1A and 5V 2.1A)
- Built-in overcharge, over-discharge, and overcurrent protection
- Stable 5V regulated output
- Micro USB charging input
- Intelligent charging management
- Compact PCB design for DIY power bank projects
- Easy battery and USB connection terminals
Specifications
- Input Voltage: 5V DC (Micro USB)
- Input Current: Up to 1A
- Output Voltage: 5V DC
- USB Output 1: 5V / 1A
- USB Output 2: 5V / 2.1A
- Battery Type: 3.7V 18650 Lithium-Ion Battery
- Protection Functions:
- Overcharge Protection
- Over-discharge Protection
- Overcurrent Protection
- Short Circuit Protection
- Display: Battery Level / Charging Status Indicator (model dependent)
- PCB Size: Approx. 57mm × 28mm
Applications
- DIY Power Banks
- Mobile Phone Chargers
- Portable USB Power Supplies
- Arduino and ESP32 Projects
- IoT Devices
- Emergency Backup Power Systems
- Robotics and Electronics Projects
SKU: AB0167 -
Electronic Components, Electronic Modules, Mechanical Parts, Sensor Mudules
Electronic Digital LCD Display Thermometer Aquarium Refrigerator Water Temperature Gauge Meter with Probe
-40%
Electronic Components, Electronic Modules, Mechanical Parts, Sensor MudulesElectronic Digital LCD Display Thermometer Aquarium Refrigerator Water Temperature Gauge Meter with Probe
-
✅ Clear Digital LCD Display – Large screen shows temperature readings instantly and clearly.
-
✅ Wide Measuring Range – Monitors from -50°C to +70°C (-58°F to +158°F) with ±1°C accuracy.
-
✅ Waterproof Probe Sensor – Ideal for aquariums, refrigerators, freezers, incubators, and water tanks.
-
✅ Compact & Portable Design – Lightweight, space-saving, and easy to install anywhere.
-
✅ 1m Flexible Cable – Place the probe in the required location for convenient monitoring.
-
✅ Battery Operated – Powered by LR44/AG13 button cell (included), easy to replace.
-
✅ Multi-Purpose Use – Suitable for home, kitchen, pet care, food storage, scientific experiments, and daily household needs.
-
✅ Durable & Reliable – Built to provide accurate real-time temperature monitoring for long-term use.
SKU: n/a -
-
Advance Development Boards, Development boards, DIY Kits, Electronic Modules, IOT & Wireless, IOT Development Boards, IOT WIFI Smart Switches, Premium Kits
ESP8266 Nodemcu CP2102 Wifi based Basic Starter Kit with Micro USB Cable, 2 Channel relay Module, Female to Female Jumper wire AB0280
-48%
Advance Development Boards, Development boards, DIY Kits, Electronic Modules, IOT & Wireless, IOT Development Boards, IOT WIFI Smart Switches, Premium KitsESP8266 Nodemcu CP2102 Wifi based Basic Starter Kit with Micro USB Cable, 2 Channel relay Module, Female to Female Jumper wire AB0280
SKU: AB0280 -
Electronic Modules, IMU, Accelerometer, Magnetometer and Gyroscope, Sensor Mudules
GY-521 MPU-6050 Module without Soldering
-45%
Electronic Modules, IMU, Accelerometer, Magnetometer and Gyroscope, Sensor MudulesGY-521 MPU-6050 Module without Soldering
- QUICK OVERVIEW
- Model Number-AB149
- Product name-Y-521 MPU-6050 Module
- Model Number-AB149
- Color-as picture
- Voltage-Standard V
- Type-Y-521 MPU-6050 Module
- Temperature- Standard T
SKU: n/a -
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & Wireless
HC-05 Bluetooth Module
-56%
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & WirelessHC-05 Bluetooth Module
Specifications
- Profiles: Bluetooth serial port Profile
- Dimension: 26.9mm x 13mm x 2.2 mm
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band, Range
- Modulation: GFSK (Gaussian Frequency Shift Keying)
- Sensitivity: -84dBm at 0.1% BER
- Speed: Asynchronous: 2.1Mbpsmax / 160 kbps, Synchronous: 1Mbps/1Mbps
- Emission power: 4dBm, Class 2
- Power supply: +3.3V, 50mA
- Security: Authentication and encryption
- Working temperature: -20°C to +75°C
SKU: n/a
Automatic Street Light Model Kit
HM-10 BLE Bluetooth Module with TTL (New Version of HC 05) AB0078
Digital Multimeter LCD AC DC Measuring Voltage Current AB0133 







