IOT & Wireless
Showing all 24 results
-
Breakout Borads, NRF, Transmitter and Receiver Modules, Uncategorized
3.3V Adapter Board for NRF24L01 Wireless Module
-67%
Breakout Borads, NRF, Transmitter and Receiver Modules, Uncategorized3.3V Adapter Board for NRF24L01 Wireless Module
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
SKU: n/a -
Other ESP WiFi Modules, Relay Modules
Autobotix ESP 8266 WIFI 5V CHANNEL RELAY MODULE
Features:
- Built-in ESP8266 WiFi module for wireless communication
- 5V single-channel relay for switching electrical loads
- Supports remote control through WiFi network
- Compatible with Arduino IDE programming
- Compact PCB design for easy installation
- Suitable for smart home and IoT applications
- Can control AC and DC appliances remotely
- Easy GPIO access for custom projects
Applications:
- Home automation systems
- Smart light control
- Wireless appliance switching
- IoT-based automation projects
- Remote motor and pump control
- Robotics and embedded systems
- Industrial monitoring and automation
SKU: n/a -
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi Modules
ESP 32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (30 PIN)
-51%
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi ModulesESP 32 Development Board CP2102 WiFi Bluetooth Ultra-Low Power Consumption Dual Core (30 PIN)
The ESP32 Development Board CP2102 features a dual-core ESP32 chip with WiFi and Bluetooth capabilities, offering ultra-low power consumption for energy-efficient IoT projects. With 30 GPIO pins for flexible connections and high performance, it’s perfect for developing smart devices, wearables, and other wireless applications.
SKU: n/a -
Other ESP WiFi Modules, Transmitter and Receiver Modules
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
-76%
Other ESP WiFi Modules, Transmitter and Receiver ModulesESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
The ESP-12E is a WiFi transceiver module based on the ESP8266 chip, designed for easy integration with Arduino boards. It enables wireless communication for IoT projects, supporting both TCP/IP and UDP protocols. With low power consumption and simple serial communication, it’s ideal for remote control, data exchange, and wireless applications.
SKU: n/a -
Cameras, IOT & Wireless, IOT Cameras
ESP32-CAM Camera Module Development Board
The ESP32-CAM Camera Module Development Board features an ESP32 chip with built-in WiFi, Bluetooth, and a 2MP OV2640 camera. Ideal for IoT, security, and image processing projects, it supports real-time image capture, streaming, and remote control. With an SD card slot and low power consumption, it’s perfect for surveillance and DIY applications.
SKU: n/a -
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi Modules
ESP8266 NodeMCU CP2102 Board
-55%
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi ModulesESP8266 NodeMCU CP2102 Board
Specifications:
- Chip: ESP8266
- USB-to-Serial Chip: CP2102
- Flash Memory: 4MB (varies by version)
- Operating Voltage: 3.3V (powered through USB)
- I/O Pins: 11 GPIO pins (for sensors and peripherals)
- Operating Frequency: 80MHz / 160MHz
- Connectivity: Wi-Fi (802.11 b/g/n)
- Size: Approx. 58mm x 31mm (varies by manufacturer)
- Compatible with Arduino IDE
SKU: n/a -
Advance Development Boards, Development boards, DIY Kits, Electronic Modules, IOT & Wireless, IOT Development Boards, IOT WIFI Smart Switches, Premium Kits
ESP8266 Nodemcu CP2102 Wifi based Basic Starter Kit with Micro USB Cable, 2 Channel relay Module, Female to Female Jumper wire AB0280
-48%
Advance Development Boards, Development boards, DIY Kits, Electronic Modules, IOT & Wireless, IOT Development Boards, IOT WIFI Smart Switches, Premium KitsESP8266 Nodemcu CP2102 Wifi based Basic Starter Kit with Micro USB Cable, 2 Channel relay Module, Female to Female Jumper wire AB0280
SKU: AB0280 -
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & Wireless
Hc-05 Bluetooth RF Wireless Transceiver Module
-56%
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & WirelessHc-05 Bluetooth RF Wireless Transceiver Module
Applications:
- Wireless Communication: Used for wireless communication in embedded systems, IoT devices, home automation, etc.
- Arduino Projects: Commonly used in Arduino projects to enable wireless communication between an Arduino board and a mobile phone or other Bluetooth-enabled devices.
- Remote Control: Ideal for creating wireless remote control systems, such as controlling robots or smart devices.
- Data Transfer: Can be used for transferring data between devices, such as sensor data from one device to another.
Pin Configuration:
- VCC: Power supply (3.3V to 5V).
- GND: Ground connection.
- TXD (Transmit): Serial data output.
- RXD (Receive): Serial data input.
- STATE: Indicates the Bluetooth connection status.
- EN: Enable pin (used to set the module into AT command mode).
Package Includes:
- 1 x HC-05 Bluetooth module.
SKU: n/a -
Bluetooth and NRF Modules, Electronic Modules, IOT & Wireless
Nrf 24l01+pa+lna SMA Antenna Wireless Transceiver Communication Module 2.4g 1100m (Pack of 1) AB0159
-37%
Bluetooth and NRF Modules, Electronic Modules, IOT & WirelessNrf 24l01+pa+lna SMA Antenna Wireless Transceiver Communication Module 2.4g 1100m (Pack of 1) AB0159
Features:
- Operates in the 2.4GHz ISM frequency band
- Built-in PA and LNA for enhanced range and signal quality
- Communication range up to 1100 meters (open area)
- External SMA antenna for improved performance
- SPI interface for easy microcontroller integration
- Low power consumption
- Compatible with Arduino, Raspberry Pi, ESP32, AVR, and STM32
Applications:
- Wireless Sensor Networks
- Remote Control Systems
- Home Automation
- Robotics Projects
- IoT Devices
- Telemetry and Data Communication
SKU: AB0159 -
Communication Module, IOT & Wireless, Latest Product
RC522 RFID Kit-13.56MHz RFID-RC522 Reader/Writer Module+Standard Blank RFID Chip+Straight Header Strip+Right-Angle Header Strip+A Special Shaped RFID Tag Keychain AB0193
Communication Module, IOT & Wireless, Latest ProductRC522 RFID Kit-13.56MHz RFID-RC522 Reader/Writer Module+Standard Blank RFID Chip+Straight Header Strip+Right-Angle Header Strip+A Special Shaped RFID Tag Keychain AB0193
Features
- Operates at 13.56MHz RFID frequency.
- Supports reading and writing RFID cards and tags.
- SPI communication interface for fast data transfer.
- Compatible with Arduino Uno, Mega, Nano, ESP8266, ESP32, Raspberry Pi, and other development boards.
- Includes both RFID card and RFID keychain tag for immediate testing.
- Low power consumption and stable performance.
- Ideal for security, authentication, and attendance projects.
- Easy to install using included straight and right-angle header strips.
Specifications
- Module: MFRC522 RFID Reader/Writer
- Operating Frequency: 13.56MHz
- Communication Interface: SPI
- Operating Voltage: 3.3V DC
- Reading Distance: Up to 3–6 cm (depending on tag and environment)
- Protocol Support: ISO/IEC 14443 Type A
- Compact PCB design for embedded applications
Package Includes
- 1 × RC522 RFID Reader/Writer Module
- 1 × Standard Blank RFID Card
- 1 × RFID Keychain Tag (Special Shape)
- 1 × Straight Header Strip
- 1 × Right-Angle Header Strip
Applications
- RFID Door Lock Systems
- Attendance Management Systems
- Access Control Projects
- Smart Identification Systems
- Inventory Tracking
- Security and Authentication Projects
- Arduino and IoT Learning Projects
- Automation and Embedded System Development
SKU: AB0193 -
IOT & Wireless, Transmitter and Receiver Modules
RF Modules Tx & Rx 315 MHz ASK 433Mhz | Wireless Transmitter and Receiver Module Kit
-50%
IOT & Wireless, Transmitter and Receiver ModulesRF Modules Tx & Rx 315 MHz ASK 433Mhz | Wireless Transmitter and Receiver Module Kit
Specifications:
- Transmitter Frequency: 315 MHz / 433 MHz (depending on module variant)
- Receiver Frequency: 315 MHz / 433 MHz
- Modulation: ASK (Amplitude Shift Keying)
- Voltage: Typically 5V or 3.3V depending on the module version
- Data Rate: Low data rates (typically up to 1-10 kbps)
- Range: Up to 100 meters (with proper antenna and clear line of sight)
- Interface: Uses simple digital I/O pins for communication with microcontrollers
- Power Consumption: Low power, suitable for battery-powered applications
Applications:
- Wireless Remote Controls: For controlling devices like garage doors, electric gates, or home appliances.
- Wireless Sensor Networks: Sending data from remote sensors like temperature, humidity, or motion sensors to a base station.
- Home Automation: Integrating wireless communication for smart home devices such as light control, security systems, or automated locks.
- Security Systems: For alarm systems, motion detectors, or door/window sensors.
- IoT Projects: Connecting devices to a network without using Wi-Fi, ideal for battery-operated, low-power IoT applications.
SKU: n/a
