Uncategorized
Enfalion 10uF 63V Radial Electrolytic Capacitor – Through Hole Package
Specifications:
| Parameter | Value |
|---|---|
| Product Type | Radial Electrolytic Capacitor |
| Brand | Enfalion |
| Capacitance | 10µF |
| Rated Voltage | 63V DC |
| Capacitance Tolerance | ±20% |
| ESR | Low ESR |
| Package Type | Radial Through Hole |
| Capacitor Dimensions | 5 × 11mm |
| Lead Type | Radial |
| Operating Temperature | -40°C to +115°C |
| Endurance | 5,000–8,000 Hours @ 115°C |
| Applications | Power Supplies, SMPS, LED Drivers, Audio Circuits, Filtering, Decoupling, General Electronics |
| RoHS Compliance | Yes |
SKU: n/a
Uncategorized
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
-44%
Uncategorized
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
Common Applications
Door-open and door-closed detection
Window security alarms
Magnetic proximity detection
Contactless limit switches
Bicycle wheel speed measurement
Rotation and RPM counting
Position detection
Magnetic counters
Smart-home projects
Robot position sensing
Arduino security projects
Electronic lock monitoring
Industrial model projects
DIY automation systems
Student science projects
SKU: n/a
Uncategorized
1KG Load Cell – Weight Sensor for Electronic kitchen Weighing Scale
1KG Load Cell Module Specifications:
Differential input voltage: ±40mV (Full-scale differential input voltage is ± 40mV)
Data accuracy: 24 bit (24 bit A / D converter chip.)
Refresh frequency: 10/80 Hz
Operating Voltage: 2.7V to 5VDC
Operating current: <10 mA
1kg Load Cell Measuring Range
SKU: n/a
Uncategorized
Lora Antenna 3dBi IPEX Spring for Ra-02 Module
Features:
The 433MHz spring antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. It can be used for 0.96 OLED Display ESP32 Lora develpment board.
3dBi wireless module digital transmit antenna IPEX 13 U.FL Interface.
Central Frequency: 433MHz; SWR: =<1.5; Gain: 3dBi.
Maximum Power: 10W; Input Impedance: 50 ohm; Connector Type: IPX13.
Specifications:
Central Frequency: 433MHz
SWR: =<1.5
Gain: 3dBi
Maximum Power: 10W
Input Impedance: 50 ohm
Color: Black+Gold
Connector Type: IPX13
Length: 16cm
SKU: n/a
Uncategorized
ACS712 5A Current Sensor Module
Specifications
185 mV/A output sensitivity
5.0 V, single-supply operation
Output voltage proportional to AC or DC currents
Factory-trimmed for accuracy
Extremely stable output offset voltage
Nearly zero magnetic hysteresis
Analog Output so can be easily connected to any Microcontroller
SKU: n/a
Uncategorized
MAX6675 Thermocouple Sensor Relay Module
Specifications
Input voltage range: -0.3V-6V DC
Output current: 50mA
Supported Thermocouple Type: K-Type
Resolution: 0.25°C, 12 Bit
Interface: SPI
Max Temp: +1024°C
Lowest Temp : 0°C
Open Thermocouple Detection
MAX6675a Applications:
Industrial
HVAC
Appliances
Heaters
High Temperature Monitor
SKU: n/a
Uncategorized
TSL2561 Light Intensity/ Luminosity Sensor Module GY-2561 – I2C Interface
Specification:
I2C interfaces
Power supply:3.3v ~ 5v
low supply current max of 0.6mA
Selectable detection modes
High resolution 16-Bit digital output at 400 kHz I2C Fast-Modeide dynamic range: 0.1 – 40,000 LUX
Wide operating temperature range: -40°C to 85°C
Programmable interrupt function with User-Defined Upper and lower threshold settings
SKU: n/a
Shop
Showing 457–480 of 648 results
-
Uncategorized
MQ-3 Alcohol Gas Sensor Module
Quick Overview
- Power Requirements: 5VDC @ ~165mA (heater on) / ~60mA (heater off)
- Current Consumption: 150mA
- Digital Output (DO): 0.1V and 5V
- Analog Output (AO): 0.1V – 0.3V (relative to pollution), maximum concentration voltage of about 4V
- Detecting Concentration: 0.05 – 10mg/L Alcohol
SKU: n/a -
Uncategorized
MQ-4 High Sensitivity Gas Methane (CNG) Detector Sensor Module
Quick Overview
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
SKU: n/a -
-
Uncategorized
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor Module
Quick Overview
- Operating Voltage: 5V DC
- Indication of the signal output
- Dual signal output (analog output, and TTL level output)
- 0 ~ 5V analog output voltage, the higher the concentration, the higher the voltage
- High sensitivity to hydrogen
- Can be resistant to ethanol steam, LPG (petroleum), smoke interference
- Has a long life and reliable stability
- Fast response and recovery characteristics
SKU: n/a -
Uncategorized
MQ-7 CO Carbon Monoxide Coal Gas Sensor Module
Quick Overview
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
SKU: n/a -
Uncategorized
MQ135 – Air Quality Gas Sensor
High sensitivity to Ammonia, Sulfide and Benzene
Stable and Long Life
Detection Range: 10 – 300 ppm NH3, 10 – 1000 ppm Benzene, 10 – 300 ppm Alcohol
Heater Voltage: 5.0V
Dimensions: 18mm Diameter, 17mm High excluding pins, Pins – 6mm High
Long life and low cost
SKU: n/a -
Gas & Dust Sensor
MQ2 Smoke LPG Butane Gas Sensor Module
Quick Overview:
- Operating Voltage is 5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Can be used as a Digital or analog sensor
- The Sensitivity of Digital pin can be varied using the potentiometer
- Long life and low cost
- Simple drive circuit
SKU: n/a -
Audio Amplifier Module, Electronic Modules, Uncategorized
MT8870 DTMF Audio/Speech Decoding Telephone Module
-84%
Audio Amplifier Module, Electronic Modules, UncategorizedMT8870 DTMF Audio/Speech Decoding Telephone Module
Quick Overview
- Working voltage: 5V
- Power Consumption: 500MW(MAX)r: 500 MW (MAX)
- On-board voice input interface
- On-board LED, it is very convenient to check the output state.
- Onboard 5 x LED indicators for easy viewing output state
- Operating Temperature: -40-+85 °C
- IO Drive: Current Maximum 10mA.
- PCB Size : 25.4×25.4MM
SKU: n/a -
Electronic Modules, Sensor Mudules, Uncategorized
Nano CH340 Chip Board Compatible with Arduino (Soldered)
-44%
Electronic Modules, Sensor Mudules, UncategorizedNano CH340 Chip Board Compatible with Arduino (Soldered)
Features
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support power supply by 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX) and orange (L) LED.
- Auto sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Arduino Boards, AVR Development Boards, Imported, Uncategorized
Nano V3.0 Board compatible with Arduino Nano CH340/ATmega328P with USB CABLE
-55%
Arduino Boards, AVR Development Boards, Imported, UncategorizedNano V3.0 Board compatible with Arduino Nano CH340/ATmega328P with USB CABLE
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- Input Port: USB MINI
- Using Atmel Atmega328P-AU MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: AB0152 -
Advance Development Boards, Arduino Boards, Development boards, Uncategorized
Nano V3.0 CH340/ATmega328P Board compatible with Original Arduino Nano Board
-55%
Advance Development Boards, Arduino Boards, Development boards, UncategorizedNano V3.0 CH340/ATmega328P Board compatible with Original Arduino Nano Board
- Operating Voltage (logic level): 5V
- 8 analog inputs ports: A0 ~ A7
- Input Port: USB MINI
- Using Atmel Atmega328P MCU
- Standard 0.1” spacing DIP (breadboard friendly).
SKU: AB0306 -
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi Modules
Node MCU ESP8266 with CP2102 Wi-Fi Development Board
-55%
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi ModulesNode MCU ESP8266 with CP2102 Wi-Fi Development Board
Quick Review
- WiFi Module: ESP-12E
- Processor: ESP8266
- CP2102 Chip
- Built-in Flash: 32Mbit
- Antenna: Onboard PCB antenna
- Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
- WiFi Protocol: IEEE 802.11 b/g/n
- Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
- WiFi Mode: Station / SoftAP / SoftAP Station
- Power Supply: 5V
- Logic Level: 3.3V
SKU: n/a
