(6 Pcs) SG90 Micro Servo Motor 9G RC Robot Helicopter Airplane Boat Controls AB0204 Subtotal: ₹510.00
Servo Motor & Accessories
Showing all 8 results
-
Motors , Drivers & Actuators, Servo Motor & Accessories
Digital Multi Servo Tester-For ESC And Servo Testing-With 3 Operation Modes-LED Indicators AB0226
-52%
Motors , Drivers & Actuators, Servo Motor & AccessoriesDigital Multi Servo Tester-For ESC And Servo Testing-With 3 Operation Modes-LED Indicators AB0226
Features:
- Easy testing and control of servo motors and ESCs
- Supports multiple operating modes
- Compact and lightweight design
- Compatible with analog and digital servos
- No transmitter or receiver required
- Adjustable output signal using onboard potentiometer
- Stable and reliable performance
- Suitable for robotics and RC hobby applications
Modes of Operation:
- Manual Mode: Rotate servo manually using the control knob
- Neutral Mode: Automatically centers the servo at 90°
- Automatic Mode: Servo sweeps continuously across its range
Specifications:
- Operating Voltage: 4.8V to 6V DC
- Compatible Devices: Servo Motors & ESCs
- Control Signal: PWM
- Output Channels: Up to 3 Servos (depending on model)
- Interface Type: Standard 3-Pin Servo Connector
- Material: PCB with Plastic Knob
- Weight: Lightweight and portable
Applications:
- Servo motor testing
- ESC calibration
- RC airplane and drone setup
- Robotics projects
- Arduino and DIY electronics
- Servo positioning adjustment
- Hobby and educational projects
SKU: AB0226 -
Motors , Drivers & Actuators, Servo Motor & Accessories
MG995 Servo Motor AB0207
Features
- High-torque servo motor with durable metal gears.
- Suitable for heavy-load and high-performance applications.
- Standard PWM control interface.
- Fast response and precise positioning.
- Double ball-bearing design for smooth operation.
- Compatible with Arduino, ESP32, Raspberry Pi, STM32, and RC receivers.
- Strong impact resistance and long service life.
- Easy installation with included servo horns and mounting hardware.
Specifications
- Model: MG995
- Gear Type: Metal Gear
- Operating Voltage: 4.8V – 7.2V DC
- Stall Torque:
- 9.4 kg·cm @ 4.8V
- 11 kg·cm @ 6V
- Operating Speed:
- 0.20 sec/60° @ 4.8V
- 0.16 sec/60° @ 6V
- Rotation Angle: Approximately 180°
- Control Signal: PWM (Pulse Width Modulation)
- Connector Type: Standard 3-Pin Servo Connector
- Bearing Type: Dual Ball Bearing
- Weight: Approximately 55g
Applications
- Robotic Arms
- Humanoid Robots
- RC Cars, Boats, and Aircraft
- Pan-Tilt Camera Systems
- Industrial Automation Projects
- Smart Mechanical Systems
- Educational Robotics
- Arduino and IoT Projects
SKU: AB0207 -
DC Motors, Motors , Drivers & Actuators, Servo Motor & Accessories
MG996 Digital Metal Gear High Torque Servo Motor-180 Degree Rotation-CE & RoHS Approved-Universal S Type Connector AB0206
-38%
DC Motors, Motors , Drivers & Actuators, Servo Motor & AccessoriesMG996 Digital Metal Gear High Torque Servo Motor-180 Degree Rotation-CE & RoHS Approved-Universal S Type Connector AB0206
Operating voltage: 4.8 V – 7.2 V
Running Current 500 mA – 900 mA (6V)
Stall Current 2.5 A (6V)
Temperature range: 0 ºC – 55 ºC
Connector: 3 pin ‘S’ type female header
Dimension: 40.7 x 19.7 x 42.9 mm approx.
Weight: 55 g
Stall torque: 9.8 kgf·cm (4.8 V ), 11 kgf·cm (6 V)
SKU: AB0206 -
Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, New Arrival, Servo driver, Servo Motor & Accessories, Uncategorized
PCA9685 16-Channel 12-Bit PWM/Servo Driver I2C Interface
-58%
Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, New Arrival, Servo driver, Servo Motor & Accessories, UncategorizedPCA9685 16-Channel 12-Bit PWM/Servo Driver I2C Interface
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
SKU: n/a -
Motors , Drivers & Actuators, Servo Motor & Accessories
SG90 Micro Servo Motor 9G RC Robot Helicopter Airplane Boat Controls (1pc) AB0203
-93%
Motors , Drivers & Actuators, Servo Motor & AccessoriesSG90 Micro Servo Motor 9G RC Robot Helicopter Airplane Boat Controls (1pc) AB0203
Features:
- Compact and lightweight micro servo motor
- Supports precise 0° to 180° rotation
- Compatible with Arduino, ESP32, Raspberry Pi, and other microcontrollers
- High torque output for small robotic applications
- Easy PWM control interface
- Stable performance with low power consumption
- Includes servo horns and mounting accessories
Specifications:
- Operating Voltage: 4.8V to 6V DC
- Rotation Angle: 180 Degrees
- Torque: Approx. 1.8 kg/cm
- Speed: 0.1 sec/60° at 4.8V
- Gear Type: Plastic Gear
- Motor Type: DC Servo Motor
- Control Signal: PWM
- Connector Type: 3-Pin
- Wire Length: Approx. 25cm
- Weight: Approx. 9g
SKU: AB0203 -
Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Servo Motor & Accessories
Vigor: Premium Dual Shaft BO Motor Straight Save
-46%
Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Servo Motor & AccessoriesVigor: Premium Dual Shaft BO Motor Straight Save
Features :
- Cost-effectiveness of the injection-molding process.
- Elimination of machining operations.
- Low density: lightweight, low inertia.
- Uniformity of parts.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Corrosion-resistance; elimination of plating, or protective coatings.
- The quietness of operation.
- Tolerances often less critical than for metal gears, due in part to their greater resilience.
- Consistency with the trend to greater use of plastic housings and other components.
SKU: n/a
