Dark Light
-35%
,

20A Range Current Sensor Module ACS712

SKU:

Low-noise Analog signal path

Device bandwidth is set via the new FILTER pin

5 µs output rise time in response to step input current

Small footprint, low-profile SOIC8 package

2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8

Supply Voltage: 4.5V~5.5V DC

Measure Current Range: 20A

Sensitivity: 100mV/A

78.00 120.00

Compare

20A Range Current Sensor Module ACS712

The 20A Range Current Sensor Module ACS712 consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional voltage.

Sensing and controlling current flow is a fundamental requirement in a wide variety of applications including, over-current protection circuits, battery chargers, switching mode power supplies, digital watt meters, programmable current sources, etc.

We are supplying two more of such modules which equip ACS712 IC for current measurement, they are as below

5A Range Current Sensor Module ACS712
30A Range Current Sensor Module ACS712

Connection Diagram:

arduino_ACS712

 

arduino_ACS712


Features :

  1. The low-noise analog signal path
  2. Device bandwidth is set via the new FILTER pin
  3. 5 µs output rise time in response to step input current
  4. Small footprint, low-profile SOIC8 package
  5. 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8
  6. 5.0 V, single-supply operation
  7. 66 to 185 mV/A output sensitivity
  8. Output voltage proportional to AC or DC currents
  9. Factory-trimmed for accuracy
  10. Extremely stable output offset voltage
  11. Nearly zero magnetic hysteresis
  12. The ratio metric output from the supply voltage.
Weight 0.200 kg
Dimensions 11 × 11 × 4 cm