-
×
50Kg Load Cell Weighing Sensor
1 × ₹42.00 -
×
HM-10 BLE Bluetooth Module with TTL (New Version of HC 05) AB0078
1 × ₹242.00
Subtotal: ₹284.00
Uncategorized
HX710B Air Pressure Sensor Module (0-40KPa) 3.3V-5V
Applications
Barometric pressure sensing.
Respiratory monitoring in medical devices.
Environmental monitoring stations.
Weather data logging.
Altitude measurement for drones and RC vehicles.
Pinout:
VCC: Power supply (3.3V to 5V)
GND: Ground
OUT: Pressure output (analog voltage)
SCK: Clock line for digital interface
DOUT: Data output for digital interface
SKU: n/a
Uncategorized
Enfalion 10uF 63V Radial Electrolytic Capacitor – Through Hole Package
Specifications:
| Parameter | Value |
|---|---|
| Product Type | Radial Electrolytic Capacitor |
| Brand | Enfalion |
| Capacitance | 10µF |
| Rated Voltage | 63V DC |
| Capacitance Tolerance | ±20% |
| ESR | Low ESR |
| Package Type | Radial Through Hole |
| Capacitor Dimensions | 5 × 11mm |
| Lead Type | Radial |
| Operating Temperature | -40°C to +115°C |
| Endurance | 5,000–8,000 Hours @ 115°C |
| Applications | Power Supplies, SMPS, LED Drivers, Audio Circuits, Filtering, Decoupling, General Electronics |
| RoHS Compliance | Yes |
SKU: n/a
Uncategorized
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
-44%
Uncategorized
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
Common Applications
Door-open and door-closed detection
Window security alarms
Magnetic proximity detection
Contactless limit switches
Bicycle wheel speed measurement
Rotation and RPM counting
Position detection
Magnetic counters
Smart-home projects
Robot position sensing
Arduino security projects
Electronic lock monitoring
Industrial model projects
DIY automation systems
Student science projects
SKU: n/a
Uncategorized
1KG Load Cell – Weight Sensor for Electronic kitchen Weighing Scale
1KG Load Cell Module Specifications:
Differential input voltage: ±40mV (Full-scale differential input voltage is ± 40mV)
Data accuracy: 24 bit (24 bit A / D converter chip.)
Refresh frequency: 10/80 Hz
Operating Voltage: 2.7V to 5VDC
Operating current: <10 mA
1kg Load Cell Measuring Range
SKU: n/a
Uncategorized
Lora Antenna 3dBi IPEX Spring for Ra-02 Module
Features:
The 433MHz spring antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. It can be used for 0.96 OLED Display ESP32 Lora develpment board.
3dBi wireless module digital transmit antenna IPEX 13 U.FL Interface.
Central Frequency: 433MHz; SWR: =<1.5; Gain: 3dBi.
Maximum Power: 10W; Input Impedance: 50 ohm; Connector Type: IPX13.
Specifications:
Central Frequency: 433MHz
SWR: =<1.5
Gain: 3dBi
Maximum Power: 10W
Input Impedance: 50 ohm
Color: Black+Gold
Connector Type: IPX13
Length: 16cm
SKU: n/a
Uncategorized
ACS712 5A Current Sensor Module
Specifications
185 mV/A output sensitivity
5.0 V, single-supply operation
Output voltage proportional to AC or DC currents
Factory-trimmed for accuracy
Extremely stable output offset voltage
Nearly zero magnetic hysteresis
Analog Output so can be easily connected to any Microcontroller
SKU: n/a
Shop
Showing 337–360 of 650 results
-
-
Electronic Modules, IMU, Accelerometer, Magnetometer and Gyroscope, Sensor Mudules
GY-521 MPU-6050 Module without Soldering
-45%
Electronic Modules, IMU, Accelerometer, Magnetometer and Gyroscope, Sensor MudulesGY-521 MPU-6050 Module without Soldering
- QUICK OVERVIEW
- Model Number-AB149
- Product name-Y-521 MPU-6050 Module
- Model Number-AB149
- Color-as picture
- Voltage-Standard V
- Type-Y-521 MPU-6050 Module
- Temperature- Standard T
SKU: n/a -
DIY Kits, Projects, Robotics Kit, Robotics Kits, Science kit, Science Kits, Science Project, STEM & Robotics KIt
Hand Gesture Controlled Wheel Chair DIY Project For Science / Engineering Students
-50%
DIY Kits, Projects, Robotics Kit, Robotics Kits, Science kit, Science Kits, Science Project, STEM & Robotics KItHand Gesture Controlled Wheel Chair DIY Project For Science / Engineering Students
-
🖐️ Gesture-based control system using hand movements to operate the wheelchair.
-
🤖 Arduino Nano is used to process gesture signals and control motor movement.
-
📦 ADXL335 accelerometer detects the tilt direction of the user’s hand.
-
📡 NRF24L01 wireless modules enable communication between hand unit and wheelchair.
-
⚙️ Motor driver (L293D) controls the DC motors to move in all four directions.
-
🔋 Battery-powered system with lightweight and rechargeable lithium cells.
-
🦽 Wheelchair moves forward, backward, left, and right based on hand tilt.
-
🧠 Real-time signal processing allows smooth and intuitive motion control.
-
🎯 Ideal for science fairs, engineering exhibitions, and final-year projects.
-
🧩 Great learning project to explore sensors, wireless tech, and embedded systems.
-
💡 Promotes assistive innovation for differently-abled individuals using simple electronics.
SKU: n/a -
-
DIY Kits, Premium Kits, Projects, Robotics Kits, Science Kits, STEM & Robotics KIt, STEM Education Services, STEM Kits
Hand Gesture-Controlled Smart Patient Assistance System for Patients to Request Food, Water, or Medicine | Robotics Science & Engineering Project
-50%
DIY Kits, Premium Kits, Projects, Robotics Kits, Science Kits, STEM & Robotics KIt, STEM Education Services, STEM KitsHand Gesture-Controlled Smart Patient Assistance System for Patients to Request Food, Water, or Medicine | Robotics Science & Engineering Project
-
🤝 Empowers users: Enables gesture-based communication for essential needs
-
🔧 DIY Friendly: Takes just around 30 minutes to assemble – no prior experience needed
-
🧠 STEM Focused: Great tool for learning automation, electronics, and problem-solving
-
🎨 Compact & Colorful: Dimensions: 20 x 18 x 8 cm | Weight: 200 grams | Multicoloured design
-
📚 Educational & Practical: Ideal for school projects, science exhibitions, or healthcare concepts
-
🔋 Battery Operated: Runs on standard alkaline batteries (not included)
SKU: n/a -
-
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & Wireless
HC-05 Bluetooth Module
-56%
Bluetooth and NRF Modules, Bluetooth Interfacing, Electronic Modules, IOT & WirelessHC-05 Bluetooth Module
Specifications
- Profiles: Bluetooth serial port Profile
- Dimension: 26.9mm x 13mm x 2.2 mm
- Bluetooth protocol: Bluetooth Specification v2.0+EDR
- Frequency: 2.4GHz ISM band, Range
- Modulation: GFSK (Gaussian Frequency Shift Keying)
- Sensitivity: -84dBm at 0.1% BER
- Speed: Asynchronous: 2.1Mbpsmax / 160 kbps, Synchronous: 1Mbps/1Mbps
- Emission power: 4dBm, Class 2
- Power supply: +3.3V, 50mA
- Security: Authentication and encryption
- Working temperature: -20°C to +75°C
SKU: n/a -
New Arrival, Sensor Mudules, Uncategorized
HC-SR04 Ultrasonic Distance Sensor Module
Quick Overview:
- Working Voltage:5V (DC)
- Static Current: Less than 2mA
- Output Signal:5V
- Sensor Angle: Less than 15 Degrees
- Detection Distance: 2 cm to 450 cm
- High Precision: Up to 2 mm
- Input Trigger Signal: 10µs TTL impulse
- Echo Signal: Output TTL PWL Signal
- High sensitivity ultrasonic range sensor
- Works with Arduino board
SKU: n/a -
Biometric/ ECG/ EMG Sensors, Latest Product, New Arrival, Other Sensors, Sensor Kits, Sensor Mudules, Uncategorized
Heart Rate Monitor Kit with AD8232 ECG sensor module
-45%
Biometric/ ECG/ EMG Sensors, Latest Product, New Arrival, Other Sensors, Sensor Kits, Sensor Mudules, UncategorizedHeart Rate Monitor Kit with AD8232 ECG sensor module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
SKU: n/a -
Electronic Components
Hi-Watt 9v Battery (Pack of 5)
🔋 Compact Power Source – Provides stable 9-volt output in a small, lightweight form factor.
⚡ Ideal for Electronics Projects – Widely used in DIY kits, Arduino projects, and breadboard circuits.
🔌 Perfect for Testing Circuits – Great for powering small components like sensors, buzzers, and LEDs.
🧠 Common in Educational Kits – Essential for school and engineering project kits due to ease of use.
🔁 Easy to Replace – Standardized size makes it compatible with many battery holders and clips.
🔒 Safe & Reliable – Most 9V batteries are leak-proof and come with over-discharge protection.
🎮 Used in Everyday Devices – Powers smoke detectors, remote controls, toys, and handheld devices.
♻️ Available in Rechargeable Variants – Cost-saving and eco-friendly options available.
🛠️ Universal Connector – Snap-on terminals make it easy to connect without soldering.SKU: n/a -
Uncategorized
HX710B Air Pressure Sensor Module (0-40KPa) 3.3V-5V
Applications
- Barometric pressure sensing.
- Respiratory monitoring in medical devices.
- Environmental monitoring stations.
- Weather data logging.
- Altitude measurement for drones and RC vehicles.
Pinout:
- VCC: Power supply (3.3V to 5V)
- GND: Ground
- OUT: Pressure output (analog voltage)
- SCK: Clock line for digital interface
- DOUT: Data output for digital interface
SKU: n/a -
Sensor Mudules
HX711 Weighing Pressure Sensor Module Big Size with Soldering
QUICK OVERVIEW:
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
SKU: n/a -
Amplifier Modules, Uncategorized
IC 4440/CD4440CS,6W 2-Channel, Bridge 19W Power Amplifier,TO-220,14 PIN PACK OF 1PCS
-50%
Amplifier Modules, UncategorizedIC 4440/CD4440CS,6W 2-Channel, Bridge 19W Power Amplifier,TO-220,14 PIN PACK OF 1PCS
Specifications:
- Output Power:
- 6W per channel at 12V (stereo output).
- 19W total in bridge configuration (driving both channels in bridge mode).
- Package Type: TO-220, 14-pin
- Operating Voltage: Typically 12V DC
- Amplifier Type: 2-channel bridge
- Pin Count: 14 pins
- Application: Audio power amplification
- Protection: Overcurrent and thermal protection
- Mounting Type: Through-hole (ideal for PCB integration)
Package Includes:
- 1 x IC 4440/CD4440CS, 6W 2-Channel Bridge 19W Power Amplifier (TO-220, 14 Pin).
SKU: n/a - Output Power:
-
Uncategorized
IC CD4001BD 4001 Quad 2-Input NOR Gate IC HLF Make pack of 5pcs
Applications:
-
Digital Logic Circuits
-
Signal Inversion and Control
-
Timing Circuits
-
DIY Electronics Projects
-
Educational STEM Kits and Prototyping
Package Includes:
-
5 x CD4001BD ICs (HLF Make)
This pack is perfect for electronics hobbyists, students, and engineers working on logic-based designs. Trusted HLF quality ensures reliable performance and durability in your circuits.
Let me know if you’d like a version for your e-commerce site or a printable catalog format!
-
SKU: n/a -
-
Display Modules
IIC/I2C Serial Interface Adapter Module For 16×2 (1602) Character Alphanumeric LCD Display – Pack Of 1 AB0080
-65%
Display ModulesIIC/I2C Serial Interface Adapter Module For 16×2 (1602) Character Alphanumeric LCD Display – Pack Of 1 AB0080
Specifications
- Interface: I2C (SDA, SCL)
- Operating Voltage: 5V DC
- Controller IC: PCF8574
- Compatible LCDs: 16×2, 20×4 (HD44780-based)
- Adjustable Contrast: Yes
- I2C Address: Configurable via address jumpers
- Communication Speed: Standard I2C protocol
Applications
- Arduino LCD Projects
- Home Automation Systems
- IoT Display Interfaces
- Embedded Systems
- Data Monitoring Displays
- Robotics Projects
- Industrial Control Panels
SKU: AB0080 -
Batteries ,Chargers & Accessories, Battery Accesssories, Electronic Modules, Power Supply
iMax B3 LiPo Battery Charger (US Plug)
-51%
Batteries ,Chargers & Accessories, Battery Accesssories, Electronic Modules, Power SupplyiMax B3 LiPo Battery Charger (US Plug)
Input Voltage(AC): 100- 240v
Battery Type: LiPo (Lithium Polymer)
Balance Charge Current: 840mA
Output Current: 3 x 800mA
Power Plug: US Plug
Dimensions: 92*59*35.5mm
Case Material: ABS
SKU: n/a
