-
×
PCA9685 16-Channel 12-Bit PWM/Servo Driver I2C Interface
1 × ₹210.00 -
×
L9110S DC Stepper Motor Driver Board
1 × ₹45.00
Subtotal: ₹255.00
motor driver
Showing all 8 results
-
Basic Electronic Components, Electronic Components, Electronic Modules, Motors , Drivers & Actuators
DRV8833 2 Channel DC Motor Driver
-81%
Basic Electronic Components, Electronic Components, Electronic Modules, Motors , Drivers & ActuatorsDRV8833 2 Channel DC Motor Driver
Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor.
Operating voltage: 2.7‌‌ V to 10.8 V
Output current: 1.2 A continuous (2 A peak) per motor.
Inputs are 3V- and 5V-compatible.
SKU: n/a -
DC Motors, Motor Accessories, Motors , Drivers & Actuators, Motors & Controllers
L Shape Single-shaft DC3V-6V Smart Car Gear Motor (50RPM/3v)
-29%
DC Motors, Motor Accessories, Motors , Drivers & Actuators, Motors & ControllersL Shape Single-shaft DC3V-6V Smart Car Gear Motor (50RPM/3v)
DIY Projects
Battery-operated toys
Disk drives Steel rollingmillsPaper
Machines Medical equipment
Radio-controlled aircraft
Automobiles Drive systems Positioning
Industrial and consumer actuators Winches Robotics Mixers
SKU: AB0108 -
Electronic Components, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & Controllers
L293D Motor Driver/Servo Shield for Arduino
-69%
Electronic Components, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & ControllersL293D Motor Driver/Servo Shield for Arduino
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
SKU: n/a -
DC Motors, Electronic Modules, Latest Product, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & Controllers
L298N Based Motor Driver Module
-39%
DC Motors, Electronic Modules, Latest Product, Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, Motors & ControllersL298N Based Motor Driver Module
Quick Overview:
- Operating Supply Voltage: Up to 46V
- Total DC Current: Up to 4A (2A per channel)
- Logical Voltage: 5V
- Drive Voltage: 5V-35V
- Logical Current: 0-36mA
- Drive Current: 2A (max. single bridge)
- Max Power: 25W
- Dimensions: 44 x 44 x 28 mm (LxWxH)
- Weight: 26g
SKU: n/a -
-
Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, New Arrival, Servo driver, Servo Motor & Accessories, Uncategorized
PCA9685 16-Channel 12-Bit PWM/Servo Driver I2C Interface
-58%Motor Accessories, Motor Drivers, Motors , Drivers & Actuators, New Arrival, Servo driver, Servo Motor & Accessories, UncategorizedPCA9685 16-Channel 12-Bit PWM/Servo Driver I2C Interface
Quick Overview
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
- Configurable push-pull or an open-drain output
- The output enable pin to quickly disable all the outputs
- Terminal block for power input
- Reverse polarity protection on the terminal block input
- Green power-good LED
SKU: n/a -
Electronic Components, Electronic Modules, Sensor Mudules
TB6612FNG Dual Motor Driver Module 1A for Arduino
-60%
Electronic Components, Electronic Modules, Sensor MudulesTB6612FNG Dual Motor Driver Module 1A for Arduino
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short break/stop motor control modes
Built-in thermal shutdown circuit and a low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1 spaced pins
Filtering capacitors on both supply lines
SKU: n/a
