Sensor Mudules
Showing 73–96 of 114 results
-
-
-
Gas & Dust Sensor
MQ2 Smoke LPG Butane Gas Sensor Module
Quick Overview:
- Operating Voltage is 5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Can be used as a Digital or analog sensor
- The Sensitivity of Digital pin can be varied using the potentiometer
- Long life and low cost
- Simple drive circuit
SKU: n/a -
Electronic Modules, Sensor Mudules, Uncategorized
Nano CH340 Chip Board Compatible with Arduino (Soldered)
-44%
Electronic Modules, Sensor Mudules, UncategorizedNano CH340 Chip Board Compatible with Arduino (Soldered)
Features
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support power supply by 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX) and orange (L) LED.
- Auto sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
SKU: n/a -
Biometric/ ECG/ EMG Sensors, Sensor Mudules, Touch Sensor
R307 Optical Fingerprint Reader Sensor Module AB0184
-48%
Biometric/ ECG/ EMG Sensors, Sensor Mudules, Touch SensorR307 Optical Fingerprint Reader Sensor Module AB0184
Features
- High-accuracy optical fingerprint recognition.
- Supports fingerprint enrollment, verification, and identification.
- Built-in processor and memory for fingerprint template storage.
- UART serial communication interface for easy integration.
- Fast fingerprint matching and response time.
- Compact and durable design.
- Compatible with Arduino, ESP32, Raspberry Pi, STM32, and other controllers.
- Low power consumption and reliable operation.
Specifications
- Sensor Type: Optical Fingerprint Sensor
- Communication Interface: UART (TTL Serial)
- Operating Voltage: 3.6V – 6V DC
- Fingerprint Capacity: Up to 1000 fingerprints (varies by model)
- Recognition Time: Less than 1 second
- False Acceptance Rate (FAR): Low
- False Rejection Rate (FRR): Low
- Image Resolution: High-quality optical capture
- Operating Temperature: -20°C to +50°C
Applications
- Biometric Attendance Systems
- Fingerprint-Based Door Locks
- Access Control Systems
- Smart Safes and Lockers
- Home Automation Projects
- Security and Authentication Systems
- IoT and Embedded Projects
- Educational and Research Applications
SKU: AB0184 -
Electronic Components, Sensor Mudules
Sharp GP2Y10 Optical Dust Sensor
- Compliant with RoHS directive (2002/95/EC)
- Compact, thin package (46.0 × 30.0 × 17.6 mm)
- Low consumption current (Icc: MAX. 20 mA)
- The presence of dust can be detected by the photometry of only one pulse
- Enable to distinguish smoke from house dust
- Lead-free and RoHS directive complian
SKU: n/a -
Electronic Components, Electronic Modules, Sensor Mudules
STM32F103C8T6 ARM STM32 Minimum System Development Board Module
-80%
Electronic Components, Electronic Modules, Sensor MudulesSTM32F103C8T6 ARM STM32 Minimum System Development Board Module
- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: n/a -
Electronic Components, Electronic Modules, Sensor Mudules
T Plug Deans Connector for LiPo Battery Male and Female 2 Pair
-50%
Electronic Components, Electronic Modules, Sensor MudulesT Plug Deans Connector for LiPo Battery Male and Female 2 Pair
- Connector type: pair of the male and female connector
- Best suited for LiPo Battery
- Colour: Red and Copper
- Shape: Banana Connector
- Current rating: 60A of continuous load
- Maximum current: 75A
- Material: plastic and copper
- Improved Locking.
- Good resistance to Temperature & High amps. Current.
SKU: n/a -
Electronic Components, Electronic Modules, Sensor Mudules
TB6612FNG Dual Motor Driver Module 1A for Arduino
-60%
Electronic Components, Electronic Modules, Sensor MudulesTB6612FNG Dual Motor Driver Module 1A for Arduino
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
CW/CCW/short break/stop motor control modes
Built-in thermal shutdown circuit and a low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1 spaced pins
Filtering capacitors on both supply lines
SKU: n/a -
Electronic Modules, Other Sensors, Sensor Mudules, Temperature & Humidity Sensor, Thermoelectric Peltier Elements, Uncategorized
TEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module
-21%
Electronic Modules, Other Sensors, Sensor Mudules, Temperature & Humidity Sensor, Thermoelectric Peltier Elements, UncategorizedTEC1-12706 40x40mm Thermoelectric Cooler 6A Peltier Module
Specification:
Model number: TEC1-12706
Operating Voltage: 12V
Maximum Voltage Umax (V) : 15.4V
Maximum Current Imax (A) : 6A
Maximum Power: 92 W
Maximum Temperature: 138°C
Power Cord: 200mm
SKU: AB0223 -
Electronic Components, Sensor Mudules, Temperature & Humidity Sensor, Thermoelectric Peltier Elements, Uncategorized
TEC1-12715 Thermoelectric Cooler 15A Peltier Module
-34%
Electronic Components, Sensor Mudules, Temperature & Humidity Sensor, Thermoelectric Peltier Elements, UncategorizedTEC1-12715 Thermoelectric Cooler 15A Peltier Module
Model number: TEC1-12715
Operating Voltage: 12V
Maximum Voltage- Umax (V) : 15V
Maximum Current- Imax (A) : 15A
Maximum Power : 230 W
Power Cord: 25cm.
SKU: n/a -
Electronic Modules, Thermoelectric Peltier Elements, Uncategorized
Thermoelectric Peltier/TEC based Refrigeration Cooler kit DC 12V Including All Accessories TEC1-12706 + Fan + Heatsink + Screws AB0308
-50%
Electronic Modules, Thermoelectric Peltier Elements, UncategorizedThermoelectric Peltier/TEC based Refrigeration Cooler kit DC 12V Including All Accessories TEC1-12706 + Fan + Heatsink + Screws AB0308
Voltage(V) 12
Current(A) 6
Material Metal and plastic
Dimensions in mm (LxWxH) 220 x 140 x 40
Weight (gm) 390
SKU: AB0308
