| Weight | 0.35 kg |
|---|---|
| Dimensions | 12 × 10 × 5 cm |
Advance Development Boards, Arduino Boards, Development boards
Arduino Pro Mini – ATMEGA 328P – AU 5V -16Mhz AB0175
SKU: AB0175
Availability:
7 in stock
₹255.00 ₹490.00
7 in stock
CompareRelated products
-
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi Modules
Node MCU ESP8266 with CP2102 Wi-Fi Development Board
-55%
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi ModulesNode MCU ESP8266 with CP2102 Wi-Fi Development Board
0 out of 5(0)Quick Review
- WiFi Module: ESP-12E
- Processor: ESP8266
- CP2102 Chip
- Built-in Flash: 32Mbit
- Antenna: Onboard PCB antenna
- Peripheral interface: UART/SPI/I2C/SDIO/GPIO/ADC/PWM
- WiFi Protocol: IEEE 802.11 b/g/n
- Frequency Range: 2.4G ~ 2.5G (2400M ~ 2483.5M)
- WiFi Mode: Station / SoftAP / SoftAP Station
- Power Supply: 5V
- Logic Level: 3.3V
SKU: n/a -
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi Modules
ESP32 Development Board CP2102 Chip 38 Pin
-40%
Advance Development Boards, Development boards, IOT & Wireless, IOT Development Boards, Other ESP WiFi ModulesESP32 Development Board CP2102 Chip 38 Pin
0 out of 5(0)Quick Overview:
- Processor: Dual-core Xtensa® 32-bit LX6, up to 600 DMIPS
- Memory:Â 4MB SPI Flash, 520KB SRAM, 16KB RTC SRAM
- Connectivity: WiFi 802.11 b/g/n/e/i (up to 150 Mbps) + Bluetooth v4.2 BR/EDR & BLE
- Features: Micro USB power, reset & firmware buttons, virtual USB for debugging
- Antenna:Â On-board 3DBi PCB antenna
- Security:Â WPA/WPA2/WPA2-Enterprise, TSN, WPS
- Modes:Â Station / SoftAP /Â Wi-Fi Direct (P2P)
- Size: 25.4 × 48.3 mm
SKU: AB0271 -
Development boards
STM32F103C6T6A Board STMicroelectronics ARM Microcontrollers
0 out of 5(0)- 100% Brand new and high-quality STM32 Board
- 72MHz work frequency.
- 64K flash memory, 20K SRAM.
- 2.0-3.6V power, I/O.
- Reset(POR/PDR).
- 4-16MHz crystal.
- Onboard Mini USB interface, you can give the board power supply and USB communication.
SKU: n/a





