TB6612FNG Dual Motor Driver Module 1A for Arduino

TB6612FNG Dual Motor Driver Module 1A for Arduino

The TB6612FNG Motor Driver Module can manage two DC motors, providing a steady current of 1.2A (3.2A peak). It operates in four modes—CW, CCW, short-brake, and stop—controlled by two input signals (IN1 and IN2).

Each motor output (A and B) is independently controllable, with motor speed regulated by a PWM input signal up to 100kHz. To deactivate standby mode, the STBY pin must be set high.

The logic supply voltage (VCC) ranges from 2.7 to 5.5VDC, and the motor supply (VM) has a 15VDC maximum. The output current supports up to 1.2A per channel or 3.2A for a brief pulse.

The board is fully assembled with all components, including decoupling capacitors on both supply lines. All TB6612FNG pins are accessible via two 0.1″ pitch headers, organized with input pins on one side and output pins on the other.

Features 

1. Output current: Iout=1.2A(average) / 3.2A (peak)
2. Standby control to save power
3. CW/CCW/short break/stop motor control modes
4. Built-in thermal shutdown circuit and a low voltage detecting circuit
5. All pins of the TB6612FNG broken out to 0.1 spaced pins
6. Filtering capacitors on both supply lines

Specifications