HX710B Air Pressure Sensor Module (0-40KPa) 3.3V-5V
Applications
Pinout:
Enfalion 10uF 63V Radial Electrolytic Capacitor – Through Hole Package
Specifications:
| Parameter | Value |
|---|---|
| Product Type | Radial Electrolytic Capacitor |
| Brand | Enfalion |
| Capacitance | 10µF |
| Rated Voltage | 63V DC |
| Capacitance Tolerance | ±20% |
| ESR | Low ESR |
| Package Type | Radial Through Hole |
| Capacitor Dimensions | 5 × 11mm |
| Lead Type | Radial |
| Operating Temperature | -40°C to +115°C |
| Endurance | 5,000–8,000 Hours @ 115°C |
| Applications | Power Supplies, SMPS, LED Drivers, Audio Circuits, Filtering, Decoupling, General Electronics |
| RoHS Compliance | Yes |
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino

KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
Common Applications
1KG Load Cell – Weight Sensor for Electronic kitchen Weighing Scale
1KG Load Cell Module Specifications:
Lora Antenna 3dBi IPEX Spring for Ra-02 Module
Features:
The 433MHz spring antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. It can be used for 0.96 OLED Display ESP32 Lora develpment board.
3dBi wireless module digital transmit antenna IPEX 13 U.FL Interface.
Central Frequency: 433MHz; SWR: =<1.5; Gain: 3dBi.
Maximum Power: 10W; Input Impedance: 50 ohm; Connector Type: IPX13.
Specifications:
ACS712 5A Current Sensor Module
Specifications
Shop
Showing 361–384 of 650 results
-
Sensor Kits
Infrared Eye Blink Sensor with Goggles
Eye Blink Sensor is compatible with Arduino, Raspberry Pi, AVR, PIC. This Eye Blink sensor senses the eyeblink using infrared. The Variation Across the eye will vary as per eye blink. If the eye is closed the output is high otherwise the output is low.
SKU: n/a -
Uncategorized
INMP441 MEMS Omnidirectional Microphone Module High Precision / SNR Low Power I2C Interface Supports ESP32
-45%
UncategorizedINMP441 MEMS Omnidirectional Microphone Module High Precision / SNR Low Power I2C Interface Supports ESP32
Digital I2S interface with high precision 24-bit data
High signal to noise ratio is 61 dBA
High sensitivity – 26 dBFS
Stable frequency response from 60 Hz to 15 kHz
Low power consumption: low current consumption 1.4 mA
High PSR: -75 dBFS
SKU: n/a -
Uncategorized
Integrated Spot Welder DIY Mini Handheld Welding Pen(Blue) with NY-D01 40A Digital Display Spot Welding Controller Board AB0297
-44%
UncategorizedIntegrated Spot Welder DIY Mini Handheld Welding Pen(Blue) with NY-D01 40A Digital Display Spot Welding Controller Board AB0297
The use of STM8 industrial control centre microcontroller.2 Strong and weak electricity through optocoupler insulation, safe operation.3 The power line and footswitch line adopts the bolt the quick connect terminal, more convenient and reliable.4 Input time, current using a high-precision simple potentiometer, to ensure reliable, convenient input5 On-board power supply, state, foot, trigger indicator, work status clearly visible.6 The design of a reliable zero-crossing detection circuit to ensure that the SCR phase shift accuracy.7 The controller is compatible with 40A SCR.8 Digital control interface, you can display the current time and current settings.9 Input time of 1-50, cycle unit (1 cycles is 20 ms), current input (30-99%)10x NY-D01 40A Digital Display Spot Welding Controller BoardSKU: AB0297 -
DIY Kits, Projects, Robotics Kit, Robotics Kits, Science kit, Science Kits, Science Project, STEM & Robotics KIt, STEM Education Services
IR Remote Control Wheel Chair DIY Project For Science/Engineering Students
-50%
DIY Kits, Projects, Robotics Kit, Robotics Kits, Science kit, Science Kits, Science Project, STEM & Robotics KIt, STEM Education ServicesIR Remote Control Wheel Chair DIY Project For Science/Engineering Students
-
🦽 DIY wheelchair project controlled by an IR remote for enhanced mobility.
-
🧠 Arduino-based system that decodes signals from any standard IR remote.
-
🔌 BO DC motors and an L298N motor driver used for controlling wheel movement.
-
🎮 Directional control (forward, backward, left, right) using remote buttons.
-
📡 IR sensor receives remote signals and sends them to the Arduino for processing.
-
⚙️ Arduino processes signals and commands motors to move the wheelchair.
-
💰 Low-cost and accessible solution for people with physical disabilities.
-
📚 Learn and apply concepts like IR communication, motor control, and coding.
-
🎓 Perfect for science fairs, engineering exhibitions, and academic projects.
-
🚀 Upgradeable design – add obstacle detection, Bluetooth, or voice control.
-
💡 Encourages creativity and innovation in assistive technology.
SKU: n/a -
-
-
Electronic Tools, Tools & Accessories
JTX F1 Jumper Conductive Silver Paste Set for iPhone / Android Screen Repair Line
-50%
Electronic Tools, Tools & AccessoriesJTX F1 Jumper Conductive Silver Paste Set for iPhone / Android Screen Repair Line
- Dip a soft-tipped brush into the silver paste
- Apply the silver paste to the broken lines area
- Heat and dry to form a conductive path
- Insulate with green oil to avoid short circuit
SKU: n/a -
Uncategorized
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
-44%
UncategorizedKY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
Common Applications
- Door-open and door-closed detection
- Window security alarms
- Magnetic proximity detection
- Contactless limit switches
- Bicycle wheel speed measurement
- Rotation and RPM counting
- Position detection
- Magnetic counters
- Smart-home projects
- Robot position sensing
- Arduino security projects
- Electronic lock monitoring
- Industrial model projects
- DIY automation systems
- Student science projects
SKU: n/a
BO DC motor wheels, 4.5x1.2 cm with rubber grip. AB0247
Imported 100 Pcs SMD 4 Pins Push Button Momentary Tactile Switch 6x6x5mm AB0179 
























