



Special Offer

1.8 inch TFT LCD Module
₹268.00-
Uncategorized
TCRT5000 IR Sensor Module
0 out of 5(0)- Using infrared reflective sensor TCRT5000.
- Detection of reflection distance: 1 mm to 25 mm.
- The comparator output signal clean, good waveform, driving ability, more than 15mA.
- With a multi-turn precision potentiometer adjustable sensitivity adjustment.
- The working voltage of 3.3V – 5V.
SKU: n/a -
Uncategorized
HX710B Air Pressure Sensor Module (0-40KPa) 3.3V-5V
0 out of 5(0)Applications
- Barometric pressure sensing.
- Respiratory monitoring in medical devices.
- Environmental monitoring stations.
- Weather data logging.
- Altitude measurement for drones and RC vehicles.
Pinout:
- VCC: Power supply (3.3V to 5V)
- GND: Ground
- OUT: Pressure output (analog voltage)
- SCK: Clock line for digital interface
- DOUT: Data output for digital interface
SKU: n/a -
Uncategorized
Enfalion 10uF 63V Radial Electrolytic Capacitor – Through Hole Package
0 out of 5(0)Specifications:
Parameter Value Product Type Radial Electrolytic Capacitor Brand Enfalion Capacitance 10µF Rated Voltage 63V DC Capacitance Tolerance ±20% ESR Low ESR Package Type Radial Through Hole Capacitor Dimensions 5 × 11mm Lead Type Radial Operating Temperature -40°C to +115°C Endurance 5,000–8,000 Hours @ 115°C Applications Power Supplies, SMPS, LED Drivers, Audio Circuits, Filtering, Decoupling, General Electronics RoHS Compliance Yes SKU: n/a -
Uncategorized
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
-44%
UncategorizedKY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
0 out of 5(0)Common Applications
- Door-open and door-closed detection
- Window security alarms
- Magnetic proximity detection
- Contactless limit switches
- Bicycle wheel speed measurement
- Rotation and RPM counting
- Position detection
- Magnetic counters
- Smart-home projects
- Robot position sensing
- Arduino security projects
- Electronic lock monitoring
- Industrial model projects
- DIY automation systems
- Student science projects
SKU: n/a -
Uncategorized
1KG Load Cell – Weight Sensor for Electronic kitchen Weighing Scale
0 out of 5(0)1KG Load Cell Module Specifications:
- Differential input voltage: ±40mV (Full-scale differential input voltage is ± 40mV)
- Data accuracy: 24 bit (24 bit A / D converter chip.)
- Refresh frequency: 10/80 Hz
- Operating Voltage: 2.7V to 5VDC
- Operating current: <10 mA
- 1kg Load Cell Measuring Range
SKU: n/a -
Uncategorized
Lora Antenna 3dBi IPEX Spring for Ra-02 Module
0 out of 5(0)Features:
The 433MHz spring antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. It can be used for 0.96 OLED Display ESP32 Lora develpment board.
3dBi wireless module digital transmit antenna IPEX 13 U.FL Interface.
Central Frequency: 433MHz; SWR: =<1.5; Gain: 3dBi.
Maximum Power: 10W; Input Impedance: 50 ohm; Connector Type: IPX13.Specifications:
- Central Frequency: 433MHz
- SWR: =<1.5
- Gain: 3dBi
- Maximum Power: 10W
- Input Impedance: 50 ohm
- Color: Black+Gold
- Connector Type: IPX13
- Length: 16cm
SKU: n/a -
Uncategorized
ENS160+AHT21 Carbon Dioxide Air Sensoring with COâ‚‚ VoCs Detection and Integrated Temperature Humidity Industrial Air Sensoring Module
-14%
UncategorizedENS160+AHT21 Carbon Dioxide Air Sensoring with COâ‚‚ VoCs Detection and Integrated Temperature Humidity Industrial Air Sensoring Module
0 out of 5(0)SKU: n/a
-
Uncategorized
TCRT5000 IR Sensor Module
0 out of 5(0)- Using infrared reflective sensor TCRT5000.
- Detection of reflection distance: 1 mm to 25 mm.
- The comparator output signal clean, good waveform, driving ability, more than 15mA.
- With a multi-turn precision potentiometer adjustable sensitivity adjustment.
- The working voltage of 3.3V – 5V.
SKU: n/a -
Uncategorized
HX710B Air Pressure Sensor Module (0-40KPa) 3.3V-5V
0 out of 5(0)Applications
- Barometric pressure sensing.
- Respiratory monitoring in medical devices.
- Environmental monitoring stations.
- Weather data logging.
- Altitude measurement for drones and RC vehicles.
Pinout:
- VCC: Power supply (3.3V to 5V)
- GND: Ground
- OUT: Pressure output (analog voltage)
- SCK: Clock line for digital interface
- DOUT: Data output for digital interface
SKU: n/a -
Uncategorized
Enfalion 10uF 63V Radial Electrolytic Capacitor – Through Hole Package
0 out of 5(0)Specifications:
Parameter Value Product Type Radial Electrolytic Capacitor Brand Enfalion Capacitance 10µF Rated Voltage 63V DC Capacitance Tolerance ±20% ESR Low ESR Package Type Radial Through Hole Capacitor Dimensions 5 × 11mm Lead Type Radial Operating Temperature -40°C to +115°C Endurance 5,000–8,000 Hours @ 115°C Applications Power Supplies, SMPS, LED Drivers, Audio Circuits, Filtering, Decoupling, General Electronics RoHS Compliance Yes SKU: n/a -
Uncategorized
KY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
-44%
UncategorizedKY-025 Reed Switch Sensor Module with Adjustable Digital and Analog Output – Magnetic Detection Module for Arduino
0 out of 5(0)Common Applications
- Door-open and door-closed detection
- Window security alarms
- Magnetic proximity detection
- Contactless limit switches
- Bicycle wheel speed measurement
- Rotation and RPM counting
- Position detection
- Magnetic counters
- Smart-home projects
- Robot position sensing
- Arduino security projects
- Electronic lock monitoring
- Industrial model projects
- DIY automation systems
- Student science projects
SKU: n/a -
Uncategorized
1KG Load Cell – Weight Sensor for Electronic kitchen Weighing Scale
0 out of 5(0)1KG Load Cell Module Specifications:
- Differential input voltage: ±40mV (Full-scale differential input voltage is ± 40mV)
- Data accuracy: 24 bit (24 bit A / D converter chip.)
- Refresh frequency: 10/80 Hz
- Operating Voltage: 2.7V to 5VDC
- Operating current: <10 mA
- 1kg Load Cell Measuring Range
SKU: n/a -
Uncategorized
Lora Antenna 3dBi IPEX Spring for Ra-02 Module
0 out of 5(0)Features:
The 433MHz spring antenna is rigorously tested repeatedly, with high antenna gain, small VSWR, and excellent performance. It can be used for 0.96 OLED Display ESP32 Lora develpment board.
3dBi wireless module digital transmit antenna IPEX 13 U.FL Interface.
Central Frequency: 433MHz; SWR: =<1.5; Gain: 3dBi.
Maximum Power: 10W; Input Impedance: 50 ohm; Connector Type: IPX13.Specifications:
- Central Frequency: 433MHz
- SWR: =<1.5
- Gain: 3dBi
- Maximum Power: 10W
- Input Impedance: 50 ohm
- Color: Black+Gold
- Connector Type: IPX13
- Length: 16cm
SKU: n/a -
Uncategorized
ENS160+AHT21 Carbon Dioxide Air Sensoring with COâ‚‚ VoCs Detection and Integrated Temperature Humidity Industrial Air Sensoring Module
-14%
UncategorizedENS160+AHT21 Carbon Dioxide Air Sensoring with COâ‚‚ VoCs Detection and Integrated Temperature Humidity Industrial Air Sensoring Module
0 out of 5(0)SKU: n/a
-
Battery Accesssories, Battery Protection Boards, Electronic Modules, Power Supply
TP 4056 USB Type C USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Protection Dual Functions AB0234
-44%
Battery Accesssories, Battery Protection Boards, Electronic Modules, Power SupplyTP 4056 USB Type C USB 5V 1A 18650 Lithium Battery Charger Module Charging Board with Protection Dual Functions AB0234
0 out of 5(0)SKU: AB0234 -
Cameras, Compatible with Arduino
OV7670 VGA CMOS Camera Image Sensor Module
0 out of 5(0)Quick Review
- Operating Power: 60mW/15fpsVGAYUV.
- Sleeping Mode: <20 uA.
- Lens Size: 1/6
- Max. Frame Rate: 30fps VGA.
- Sensitivity: 1.3V / (Lux-sec).
- dynamic range: 52 dB.
- Electronic Exposure: 1 to 510 row.
SKU: AB0300 -
Current and Voltage Sensor, New Arrival, Uncategorized
SCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A
-55%
Current and Voltage Sensor, New Arrival, UncategorizedSCT-013-030 Non-invasive AC Current Sensor Clamp Sensor 30A
0 out of 5(0)- Input Current: 0-30A
- Output Mode: Current/33mA
- Output Plug: 3.5mm
- Dielectric Strength: 6000V AC/1min
SKU: n/a -
Electronic Components, Power Supply, Uncategorized
XL4016E1 DC 4-40V to DC 1.25-36V 8A Buck Converter Voltage Regulator 36V 24V 12V to 5V High Power Efficiency Step Down Converter Power Supply
-73%
Electronic Components, Power Supply, UncategorizedXL4016E1 DC 4-40V to DC 1.25-36V 8A Buck Converter Voltage Regulator 36V 24V 12V to 5V High Power Efficiency Step Down Converter Power Supply
0 out of 5(0)- The Voltage Regulating Mode: PWM modulation
- Input Voltage: DC 4-40V
- Output Voltage: DC 1.25-36V
- Maximum Current: 8A(please add fan and make current less than 5A for long term use)
- Maximum Power: 200W
SKU: n/a
Best Sellers
- Top 10
- Workbench Tools
- Wires & Cables
- wheel
7 Segment Led Display Common Cathode, Pack of 10 AB0202 














